NORD spare parts are the foundation of safe and predictable drive operation in a plant – from geared motors, through industrial gear units, to drive electronics. Within the SALES section, SPEC SERWIS offers the selection and delivery of original NORD spare parts, precisely matched to the specific device and its operating conditions, so as to reduce downtime to an absolute minimum.
An investment in production continuity
Using the right spare parts has a direct impact on drive durability, the safety of people and machines, and the total cost of maintenance. Original NORD parts guarantee dimensional and material compatibility, preservation of the drive's operating parameters and compliance with the manufacturer's documentation.
SPEC SERWIS supports users in planning their spare parts management – from rapid deliveries of components replaced after failures, to creating lists of critical parts for key production lines.
Which NORD spare parts does SPEC SERWIS offer?
At SPEC SERWIS you can order a wide range of spare parts for NORD drives – both for ongoing repairs and for planned overhauls or modernisations:
- gear unit and geared motor elements (gear wheels, shafts, bearings, rotary shaft seals, housings, complete gear stages), motor parts (fans, covers, terminal clamps, brakes, encoders) and drive electronics components (power modules, control boards, operator panels, communication accessories),
- seal kits, mounting elements (feet, flanges, couplings), dedicated service packages for specific NORD drive series, as well as parts for drive modernisation (e.g. for operation with a frequency inverter, a higher degree of protection, different environmental conditions).
Thanks to our knowledge of the NORD range and our service experience, we advise which elements are worth keeping “on the shelf” and which are better ordered for specific jobs.
SPEC SERWIS support in identifying and selecting NORD spare parts
Selecting the right NORD spare part starts with correct identification of the drive. SPEC SERWIS uses name plate data, technical documentation and its own service experience to unambiguously determine the required element.
In practice, the whole process looks like this: based on the name plate, photos or documentation, we identify the specific type of NORD geared motor, gear unit, motor or drive electronics device; we verify the list of available spare parts and their current catalogue equivalents; and then we propose a solution: a like-for-like part, a repair kit or – where justified – a modernisation of the element to a newer NORD solution.
At the customer's request, we can combine spare parts selection with a drive inspection and recommendations for preventative action. Thanks to this, the ordered parts are not a random “fire-fighting” measure, but an element of a consciously planned maintenance strategy.
NORD spare parts in a maintenance strategy
We treat NORD spare parts as part of a broader approach to drives – we combine parts sales with technical advice, drive modernisation options and SPEC SERWIS service activities. This makes it possible to gradually standardise drives, shorten downtime and better control costs.
If you already use our services in geared motor servicing, drive inspections or drive electronics, we can work together to build a catalogue of critical NORD parts dedicated to your plant.
FAQs – NORD spare parts
Below you will find answers to the most frequently asked questions about NORD spare parts at SPEC SERWIS. If your situation is non-standard, we will prepare an individual proposal.
What data is needed to identify NORD spare parts?
The most important is the drive's name plate (geared motor, gear unit, motor, frequency inverter) – on its basis we can find the correct device configuration and the spare parts list. Photos of the drive and a short description of the failure symptoms or the type of damage are also very helpful, as they allow us to verify which elements actually need replacing.
Can I order a single element, or only complete assemblies?
In many cases, both individual elements (e.g. a rotary shaft seal, a fan, a brake) and complete assemblies (e.g. a complete gear stage) can be ordered. Whether replacing a single part makes sense depends on the condition of the remaining elements and the age of the drive – SPEC SERWIS helps assess whether a parts-based repair is still justified, or whether a larger scope of work or a modernisation should be considered.
Do you offer only original NORD spare parts?
Yes, for NORD drives we rely on the manufacturer's original spare parts or their current catalogue equivalents. This preserves the operating parameters, mechanical and electrical compatibility and compliance with the documentation, which is crucial for the safety and durability of the drive.
How long does it take to fulfil an order for NORD spare parts?
The lead time depends on the type of part and its availability in warehouses. Some elements are available “off the shelf” or at short notice; others – especially less typical ones – have to be brought in from central warehouses or produced. At the quotation stage, SPEC SERWIS always provides an estimated delivery time to allow service work and any line stoppages to be planned.